Siam ply
Affordable Luxury Ply
This Plywood is made under stringent quality norms from seasoned hardwood core, bonded with Synthetic Resin under controlled temperature & Pressure.
Features : Strength- Longevity- Damage & Wear resistant- Moisture Resistant- Termite & Borer Resistant.
Uses: Furniture - Partitions - Wall Panelling
| S.no | Name of the Test | Benchmark |
| 1 | Dimension & Tolerance | |
| Length | +/-5mm | |
| Width | +/-5mm | |
| Thickness | ||
| a) Less than 8mm | +/-10% | |
| b) 8mm & Above | +/-5% | |
| 2 | Squareness | Max 0.25% |
| 3 | Edge Straightness | Max 0.25% |
| 4 | Resistance to Water Adhesion of Plies | |
| (3 cycles of 8 hours @ 50 degree C +/- 2 degree C in Water and 6 hours of Drying @ 45 degree C +/- 2 degree C) | Pass | |
| 5 | Static Bending Strength ( Non-Wet) | |
| Modulus of Elasticity N/mm Square | ||
| 1. Parallel to face grain | ||
| a)Average | 3000 N/mm square | |
| b) Minimum Individual | 2700 N/mm square | |
| 2. Perpendicular to face grain | ||
| a)Average | 2000 N/mm square | |
| b) Minimum Individual | 1900 N/mm square | |
| Modulus of Rupture N/ mm square | ||
| 1. Parallel to face grain | ||
| a)Average | 25/ N mm square | |
| b) Minimum Individual | 20/ N mm square | |
| 2. Perpendicular to face grain | ||
| a)Average | 20/ N mm square | |
| b) Minimum Individual | 18/ N mm square | |
| 6 | Type Based on Classification by Appearance | AB/ BB |
| 7 | Workmanship & Finish | GOOD |
| 8 | Moisture Content% | 5-15% |